Bonita Springs Handyman: Finish Carpentry, Gutters & Gate-Cleared Work

Updated October 2026

Most calls we get from Bonita Springs are finish work: built-ins, trim upgrades, large-format TV mounts in 18-foot great rooms, on homes where the original builder's punch crew never matched the home's price point. The other half is exterior upkeep the gated communities expect kept tidy. Gutter runs, lanai screen, and the exterior hardware salt air chews up.

What separates a Bonita Springs handyman who works these communities from one who doesn't is the gate. Bonita Bay, Pelican Landing, and Spanish Wells won't pass a truck through without a current certificate of insurance on file at the gate office. We keep a COI on file with all three, so a job behind the gate starts on schedule instead of waiting a week on paperwork.

I treat every Bonita job like a closing walk-through. Caulk lines are razor-straight, screws are countersunk and putty-filled, gutter seams get resealed instead of patched over, and nothing leaves the property dusty. One trip, one punch list, honest recommendations, never upsold.

What a Bonita Springs handyman handles in these communities

A Bonita Springs handyman call out here is usually a short punch list of finish and exterior items, not one big job. The most common requests, in the order we get them: finish carpentry and built-ins that bring a builder-grade great room up to the home's price point; gutter repair, resealing, and downspout checks before and after storm season; large-format TV mounting on 16-foot and 18-foot walls; lanai and pool-cage screen repair after summer storms; and interior door, trim, and drywall touch-ups where humidity racked a jamb out of square. We stay inside our licensed handyman scope. If a job needs a specialty state license, we tell you straight rather than take it on, and we route structural or permitted rebuilds through our network of licensed providers. Most of it closes on one trip: hand us the six or eight things that piled up since the last walk-through and we knock them out in a single afternoon, with a written fixed quote on each item before we start.

Carpenter handyman work: built-ins, trim, and closing-quality finish

This is the request that brings most Bonita homeowners to us: a carpenter who does handyman-scale work without a general-contractor minimum. We build closet build-outs in MDF with poplar face frames, hang hardwood floating shelves on blocking set before the drywall closes, and match crown and base profiles to the trim already in the house by milling a sample first, then dry-fitting before anything gets nailed. The tell of a good carpenter handyman in a Bonita Bay or Pelican Landing home is in the details nobody notices: countersunk and putty-filled screws, razor-straight caulk lines, and returns that actually return square. Much of this is finish work the original builder's punch crew rushed on a home that sells north of its finish budget. We're the antidote to that: same team, same standards, every visit. See the full scope on our finish carpentry and built-ins page.

Gutter repair and resealing on Bonita's gated-community homes

Gutter work in Bonita Springs is less about leaves and more about seams and slope. On two-story homes in Bonita Bay and Pelican Landing, the long runs that wrap a lanai or a side elevation develop pinhole leaks at the sealed end caps and miter corners first, usually three to five years in, where the original sealant baked out under Florida sun. We cut out the failed sealant, reseal with a gutter-grade butyl rather than a quick smear of silicone, re-pitch any section that's holding water, and confirm every downspout carries water well away from the foundation and the pool-cage footings before storm season loads the runs. One honest note so you don't overspend: a run that just needs a reseal and a re-pitch doesn't need replacement, and we'll say which bucket yours falls in on the spot. We're fully insured for two-story ladder work, so the inspection and the reseal happen on the same ladder visit, paired with a downspout and fascia check so it's one trip, not three. Details are on our gutter cleaning and repair page.

Routing COI through the Bonita gate office before the visit

Here is the part of a gated-community job that catches most contractors flat. Bonita Bay, Pelican Landing, and Spanish Wells each require a current certificate of insurance on file at the gate office before a work truck is cleared through, and if it isn't there, the crew sits at the gate or gets turned around. We keep a COI on file with all three communities, so when you send your community name at booking the gate-office routing is already handled before the visit. That's the difference between a job that starts on schedule behind the gate and one that loses a week to paperwork. If your community uses a different gate or management office, send its COI requirements with your booking and we'll route the certificate ahead of the first visit.

Large-format TV installs (75" – 98")

Above 75 inches we anchor a 24-inch full-motion mount across two studs minimum with 5/16 x 3-1/2 lag bolts into the framing, never just the drywall anchors that ship with the mount. HDMI and power run in-wall through low-voltage brackets and a recessed Datacomm box behind the screen, so no cables show.

Custom carpentry & built-ins

Closet build-outs in MDF with poplar face frames, hardwood floating shelves anchored to blocking we install before drywall closes up, and crown profiles matched to your existing trim — we mill samples before we order stock.

Lanai & pool cage after summer storms

We replace bent uprights with matched SMA aluminum, re-screen with 20x20 mesh on the upper sections and pet-grade on the kick panels, and reseal the cage-to-deck joint with NP1, not silicone.

Working inside Bonita gated communities

We carry COI on file with Bonita Bay, Pelican Landing, and Spanish Wells gate offices. Send your community name on the booking and we'll handle the certificate routing before the visit.

How we hide HDMI and power on a great-room mount

Code does not let you run a standard HDMI through the wall cavity if the cable isn't CL2/CL3 rated, and it doesn't let you run a regular extension cord either. We use a Datacomm In-Wall Power Kit (UL-listed) that gives you a real Romex feed to a recessed receptacle behind the TV and a separate low-voltage gang for HDMI/Cat6 pull. The receptacle below the console is a normal 15A.

On a 98-inch wall mount we tilt-test before final torque — most great rooms in Bonita Bay sit on stem-wall framing with 16" OC studs, but a few of the older homes are 24" OC and we have to pick up a third stud or back the mount with a 1/4" steel plate.

Why a carpenter handyman beats a general contractor on finish punch lists

Most Bonita homeowners don't need a general contractor for the finish work they actually want done. They need a carpenter who'll build one closet system, upgrade the crown in a single room, or scribe a floating shelf to an out-of-plumb wall, without a job minimum that only makes sense on a full remodel. That's the gap we fill. We mill a sample of the existing profile before ordering any trim stock, because builder crown in a 2000s Bonita Bay home rarely matches what's on the shelf at a box store, and a mismatched return is the first thing a buyer's inspector flags.

The finish standard is the whole point. Screws countersunk and putty-filled, caulk lines cut razor-straight, and joints dry-fit before a single nail goes in. It's the same walk-through standard a listing agent wants before photos, and it's why a lot of our Bonita carpentry calls come from homeowners getting a house ready to sell.

Gutter failures on Bonita's two-story and lanai-wrap elevations

The gutter calls we get in Bonita Bay, Pelican Landing, and Spanish Wells follow a pattern. The leak almost never starts in the middle of a run. It starts at a sealed end cap or a miter corner where the factory sealant has cooked out after three to five Florida summers, and the water then tracks behind the gutter and rots the fascia the lanai or cage anchor is fastened into. On a two-story elevation the homeowner rarely sees it begin, so by the time there's a visible stain the fascia board underneath is already soft.

We reseal the caps and miters with a gutter-grade butyl instead of a quick smear of silicone, re-pitch any section ponding water, and check the downspouts carry flow well clear of the foundation and cage footings before storm season loads the runs. If the run is sound and only the sealant failed, that's a reseal, not a replacement, and we'll tell you so rather than quote new gutter you don't need. Because we're fully insured for two-story ladder work, the inspection and the fix close on one ladder visit.

Request a free quote in Bonita Springs · Call (239) 474-3189