TV Mounting Service in Fort Myers & Southwest Florida

You bought the TV, you have the mount in the box, and now you want it on the wall straight, solid, and with no cables dangling. That is the whole job we do. Smart Fix anchors your set into the studs, hides the cables in the wall where the layout allows, and sets the screen at the right seated height so the picture is comfortable instead of craned-up. You will see it tested and leveled before we pack up, and Jordan Goodwin or a team member answers most calls personally, so you are treated by name, not a file number.

What our TV mounting service includes

A Smart Fix install is a stud-anchored mount with the cables managed, not a bracket hung on drywall anchors and a power strip left on the floor. Here is exactly what happens on a visit: 1. **Locate and mark the studs.** We find the framing and anchor the bracket into solid wood. Heavy flat-screens pull plastic drywall anchors out over time, so the lag bolts go where they will actually hold. 2. **Set the correct seated height.** The center of the screen lands at seated eye level, which is usually lower than people expect. You get a picture you watch relaxed, not one that has you tilting your head back all evening. 3. **Manage the cables.** Where the wall layout allows, we run HDMI through the wall and use a code-compliant in-wall power kit so nothing dangles. Where in-wall is not possible, we route cleanly through tasteful conduit instead. 4. **Level, test, and walk you through it.** We level the set, confirm the picture and sources, and leave the wall clean. <aside class="my-6 rounded-2xl border border-border bg-card p-5 text-sm">Why studs matter: A 65-inch TV and a full-motion arm can put well over a hundred pounds of leverage on the wall when the arm is extended. Drywall anchors are not rated for that swing. Stud-anchored brackets are.</aside> Ready when you are. [Call (239) 744-8749](tel:+12397448749) and we will get you on the schedule, or [request a free quote](/contact) in a couple of minutes.

How to mount a TV on a wall the right way

Homeowners ask us how to mount a TV on a wall all the time, and the honest answer is that the mount is the easy part. The decisions that make or break the result are the ones that happen before a single hole is drilled. The five things that go wrong most often, drawn straight from the installs we get called in to fix: - **Mounting into drywall instead of studs.** The number one failure. The TV sags, then one day it comes off the wall. - **Skipping cable management.** Dangling HDMI and power cords look amateur and collect dust behind the set. - **Wrong height.** A TV centered for a standing person is too high for a seated room. Seated eye level is the rule. - **No surge protection.** More on that below, because Florida lightning earns its own section. - **Ignoring airflow.** A set pressed flat against wood traps heat. Mounts need a gap so the electronics breathe. <blockquote class="my-6 border-l-4 border-primary pl-4 italic text-foreground/85">"If you have already had a bad install, we can usually fix it without remounting the whole thing. We re-anchor into studs, clean up the cables, and reset the height."</blockquote> Want the full breakdown before you book? Read our guide to the [5 TV mounting mistakes Florida homeowners make](/blog/tv-mounting-mistakes-to-avoid), then [request a free quote](/contact) and we will tell you exactly what your wall needs.

Corner mounts, full-motion arms, and tricky walls

Not every TV goes flat on a flat wall. We handle the layouts that make a DIY install frustrating: a TV mounted in a corner of the room, a full-motion arm that swings the screen out and angles it toward the kitchen, and above-fireplace placements where the cable run has to travel. A full-motion mount is the right call when you want to watch from more than one spot, but it only works if the bracket is anchored into a stud and the arm clears the corner or mantel at full extension. A corner mount needs the bracket sized and positioned so the screen sits square to the room, not cocked at an awkward angle. We size the hardware to your set, confirm the swing before we commit, and route the slack cable so the arm can move without tugging a connection loose. <aside class="my-6 rounded-2xl border border-border bg-card p-5 text-sm">Above-fireplace note: These look great and the cable run is the catch. We plan the in-wall path before drilling so the HDMI and power come out clean behind the set rather than draped down the brick.</aside>

Surge protection and airflow for Florida sets

Two things shorten a mounted TV's life on the Gulf coast, and both are easy to get right at install time. The first is Florida lightning. Summer storm season puts more lightning over Southwest Florida than almost anywhere in the country, and a nearby strike can send a surge down the line straight into an expensive panel. We make sure your set is on real surge protection, not a bargain power strip pretending to be one. <aside class="my-6 rounded-2xl border border-border bg-card p-5 text-sm">SWFL fact: The stretch of coast from Fort Myers down through Bonita Springs sits in one of the most lightning-prone regions in the U.S. Surge protection on a mounted TV is not optional here, it is basic storm sense.</aside> The second is heat. A TV mounted flush against wood or recessed into a tight cabinet traps the heat the electronics throw off, and in a warm Florida room that adds up fast. We mount with the airflow gap the bracket is designed for so the set breathes and runs cooler. [Call (239) 744-8749](tel:+12397448749) and we will set yours up to last.

Mounting is a fixture job, not licensed electrical work

To be clear about scope: TV mounting and in-wall cable management are fixture and finish work, which is exactly what Smart Fix does in-house. We anchor the mount, run HDMI through the wall, and install code-compliant in-wall power kits that relocate an existing outlet's power behind the screen for a clean look. If a job needs a brand-new circuit run, a panel touched, or any other regulated electrical work, that is dispatched through our network of licensed providers. We will always tell you straight which bucket your job falls in before we start, so there are no surprises. For the broader picture of our fixture, camera, and [professional TV mounting on stud-anchored brackets](/services/electrical-installations), see our lighting and smart-home setup page.

Frequently Asked Questions

How high should a TV be mounted on the wall?

The center of the screen should sit at seated eye level for the room it is in, which is usually lower than people expect. A TV centered for someone standing ends up too high for a sofa and leaves you craning your neck. For most living rooms the screen center lands around 42 to 48 inches off the floor, but we set it to your actual seating, not a generic number.

Can you mount a TV without studs?

We strongly prefer to anchor into studs, because that is what holds a heavy flat-screen safely over time. On the rare wall with no usable framing where the TV needs to go, there are heavy-duty toggle-anchor solutions rated for the load, and we will use the correct hardware for the wall type and TV weight. We will also tell you honestly if a spot is not safe to mount and suggest a better one.

Can you hide the cables in the wall?

Yes, where the wall layout allows. We run HDMI through the wall and use a code-compliant in-wall power kit so nothing dangles. Where an in-wall run is not possible, such as an exterior block wall, we route the cables cleanly through tasteful conduit instead so the finish still looks intentional.

Do you install full-motion and corner mounts?

Yes. We install fixed, tilting, and full-motion arm mounts, and we handle corner placements and above-fireplace installs. We size the bracket to your TV, anchor into a stud, and confirm the arm clears the corner or mantel at full extension before we commit, then route the cable so the arm moves freely.

We also serve nearby cities

Book your TV mounting visit this week · Call (239) 744-8749